SpecificationsnG1Specifications Weight (without nose equip.) 1.50 kg (3.31 lbs) Weight (min. with equip.) 1.70 kg (3.75 lbs) Pull force @ 5.5 bar 6.0 kN (1350 lbf) Stroke (min.) 14 mm (0.55 in) Cycle time (approx.) 0.9 sec Air supply pressure 5- 7 bar (80-100 psi) Free air volume @ 5.5 bar 1.2 litres Noise level <75 dB(A) Vibration <2.5m/s² Placing Capability Up to 4.8 mm (3/16") aluminium breakstem rivets and up to 4.0 mm (5/32") steel breakstem rivets produced by Avdel®. Can also place Avseal® II 4 and 5 mm sealing plugs. nG2 Specifications Weight (without nose equip.) 1.98 kg (4.37 lbs) Weight (min. with equip) 2.12 kg (4.67 lbs)< br> Pull force @ 5.5 bar 9.34 kN (2100 lbf) Stroke (min.) 17 mm (0.67 in) Cycle time (approx.) 0.8 sec Air supply pressure 5-7 bar (80-100 psi) Free air volume @ 5.5 bar 2.1 litres Noise level <75 dB(A) Vibration <2.5m/s² Placing Capability Up to 4.8mm (3/16") breakstem rivets produced by Avdel®. Can also place Avseal® II sealing plugs up to 7 mm. nG2s Specifications Head weight (without nose equip.) 1.0 kg Head weight (min. with equip.) 1.2 Kg Pull force @ 5.5 bar 10.88 kN Stroke (min.) 17 mm Cycle time (approx.) 1 sec Air supply pressure 5- 7 bar Free air volume @ 5.5 bar 3.6 litres Noise level <75 dB(A) Vibration <2.5m/s² Intensifier ratio 44:1 Placing Capability Up to 4.8mm (3/16") breakstem rivets. Can also place Avseal® II sealing plug up to 7 mm. nG3 Specifications Weight (without nose equip.) 2.22 kg (4.89 lbs) Weight (min. with equip.) 2.30 kg (5.07 lbs) Pull force @ 5.5 bar 12.9 kN (2900 lbf) Stroke (min.) 26 mm (1.02 in) Cycle time (approx.) 1.2 sec Air supply pressure 5- 7 bar (80-100 psi) Free air volume @ 5.5 bar 4.3 litres Noise level <75 dB(A) Vibration <2.5m/s² Placing Capability Up to 6.4mm (1/4") breakstem rivets produced by Avdel, except Hemlok® structural fasteners. Can also place Avseal® II sealing plugs up to 9 mm and Avtainer® lockbolts 9.5mm (3/8"). nG4 Specifications Weight (without nose equip.) 2.28 kg (5.03 lbs) Weight (min. with equip.) 2.36 kg (5.20 lbs) Pull force @ 5.5 bar 18.68 kN (4200 lbf) Stroke (min.) 17 mm (0.67 in) Cycle time (approx.) 1.2 sec Air supply pressure 5-7 bar (80-100 psi) Free air volume @ 5.5 bar 4.3 litres Noise level <75 dB(A) Vibration <2.5m/s² Placing Capability Up to 6.4mm (1/4") breakstem rivets produced by Avdel except Monobolt® structural rivets. Can also place: Avseal® II sealing plugs up to 12 mm Avtainer® lockbolts 9.5mm (3/8") Avdelok® and Maxlok® lockbolts 4.8mm (3/16") and 6.4mm (1/4") Hemlok® structural rivets 6.4mm (1/4") Coming Soon... Gb10 Specifications Stroke Min – Max 20.0 mm 0.787In Pull Force Min 10.0 kN 2248 lbf Operating Voltage Nominal 12 VDC Cycle Time Approx (at full stroke) 2 seconds Noise Level <75 dB(A) Vibration <2.5 m/s2 8 ft/s2 Weight with nose equipment 2.5 kg 5.06 lb Features Quick Release Stem Collector Micro-Processor Control Circuit with Thermal/Stall/Low Voltage protection and LED Indicator Placing Capability The Gb10 is a battery powered hydraulic tool designed for placing Avdel® breakstem fasteners from 3.0mm to 4.8mm (3/16”) |